Ready to begin with your own plumbing jobs? Do you know where to start or how to begin? Do you know what equipment and techniques will work for your next task? Well, the tips that are listed below may be the very ones that you need.
Don’t pay a plumber until the job is completed. A plumber may require some money upfront, but it’s wise to wait until the job is completely done before giving him the entire payment. Many things can happen between the stop and end of a job, so to be safe wait until you are satisfied with the completed work before paying.
Unclog drains with ease. Try using a plunger and drain cleaner, as your clog may simply be a build-up of hair and debris. If this doesn’t work you may have to clear the drain with a snake. Feed the snake into the drain line as far as it will go. Turn the crank gently, which will help to loosen the clog. Remove the snake, and run water down the drain to see if the clog has been removed. You may have to use the snake a couple of times, before the clog is cleared so don’t give up!
During the warm seasons, you will see that there will be many bird nests forming in and around your plumbing vent pipes. It is essential to clear these out, as they can have a devastating effect on the quality of your plumbing and the flow of water in your home.
Plumbing is one of those jobs that you should not do your self. If it is something easy like a toilet repair or changing out a faucet, go ahead and give it a try. If it is a major repair, then you are better off hiring a contractor and it may be required to have a licensed plumbing contractor do the work for you.
When getting plumbing quotes for your home, make sure you receive them in writing. Your quote should have the material and labor costs so that both parties know what to expect from the job. If you do not get it in writing, when the job starts, you have nothing to fall back on.
Make sure that the temperature of your home’s water heater is not above 120F. On older water heaters, be sure it is not above medium settings. When temperatures get higher than 120, scalding can occur. Also, having the settings above 120F, tends to use more energy than lower temperatures do.
Before you being a plumbing job, take a few key steps so that you can avoid any mishaps. Turn off all water supplies before starting a project. Make sure that you have protected items nearby with tarps to keep them from getting damaged by spraying water. It is better to be prepared than it is to deal with damage after the fact.
If your sewer is backed up, there are things you can do to troubleshoot and clean, including renting equipment like a main line cable. However, often times this does not fully take care of the problem. A professional needs to assess the issue then, using a camera method, and thoroughly cleaning the main line.
Check for leaks on your water heater and softener before you leave for vacation. You can also turn off their individual shut-off valves to ensure that they don’t cause any water damage while you’re away. It’s good to check them a few weeks before you leave just in case you need any repairs.
To winterize a house that will sit unused during the winter months, you must completely drain all of the pipes. After turning off the main water supply, let all of the water drain from the faucets, toilets, and water heater (turn off the gas). Add a quart of antifreeze to sinks and the tub to prevent water from freezing in the drain trap.
Ensure that everyone in your household knows how to turn off the main water supply, or knows how to contact someone who can. In the event of a burst pipe or other water-related emergency, you should immediately turn off the water to prevent flooding, structural damage, and a sky-high water bill.
When it comes to plumbing a great choice is to invest in brass fittings. Sure, they may be more expensive upfront, however their longevity is amazing compared to the alternatives, so you end up saving money. As an added bonus, the brass fittings look so much better than the other alternatives.
Hair can clog your drains if you do not clean them regularly. You could also get some screens to place over your drains to keep most of the hair from going down. Hair usually breaks down, but it can cause your drains to back up if they are present in large quantity.
Periodically, make sure that the sump pump in your house is working to full capacity. Pour a few gallons of water into the sump pit, and your pump should drain that water out with minimal issues. Checking that your devices are working throughout the year can pay large dividends in the event of a crisis.
Twice per year, visually inspect the pipes under all of the sinks in your home. It is essential to check for leaks and fix any that you find, because leaking pipes can damage your the cabinets and the floor underneath. The dampness can also support mold growth, which can be hazardous.
To avoid sediment buildup, drain gallons of water from your water heater to flush any corrosion. This will help your heater to run more efficiently therefore saving you regular energy costs. Make sure to read your heater’s instructions before attempting this, and do this periodically to make sure that your heater is running as well as it can.
Fair enough, you’re not going to become an expert overnight – but there are surely one or two pieces of advice here that you can use. Every job that you do yourself is one less job that you have to pay someone else to do!